RS485 Weather Sensor, Louver Box Design Digital Environmental Monitoring Device for Temperature Humidity Light Intensity

1. Integrated Design: Boasting a integrated solution, this weather sensor suitable for testing atmospheric temperature, atmospheric humidity, light intensity, and CO2. Easy to install, requiring only a few screws, maximizing convenience and efficiency 2. Simple Wiring: Featuring all in one design with a single signal cable, this sensor offers convenience in both appearance and wiring. Its minimalistic look and setup blend seamlessly into any environment, enhancing appeal while facilitating maintenance 3. Excellent Material: Crafted with plastic material, the louver box has great and aging resisting, ensuring lasting performance even in harsh conditions. Its high reflectivity, low thermal conductivity make it an ideal choice for various applications 4. Efficient and Accurate: Comprehensive in its functions, this weather sensor can measure environmental parameters including atmospheric temperature, humidity, light intensity, and CO2 levels, allowing real time and accurate measurements 5. RS485 Output: Featuring RS485 output, this weather sensor seamlessly integrates into various data acquisition system, ensuring reliable data transfer, making it a versatile solution for a wide range of meteorological and environmental monitoring projects Specification: Item Type: Weather Sensor Product Material: ABS Functions: Atmospheric Temperature, Atmospheric Humidity, Light Intensity, CO2 Power Supply Mode: 9-30V Output Form: RS485 Product Size with Bending Plate: Approx. 262 x 215mm / 10.3 x 8.5in Louver Box Size: Approx. 140 x 127mm / 5.5 x 5in Weight: Approx.1266g/44.66oz Measurement Type Range Accuracy Resolution Power Consumption Luminous Flux 0-200000Lx (Outdoor) ±4% 1Lx 0.1mW 0-65535Lx (Indoor) 0.1mW CO2 0-5000ppm ±(50ppm+5%) 1ppm 100mW Atmospheric Temperature -40-100℃ (Digital Signal Output) ±0.3℃(Standard) 0.1℃ 1mW Atmospheric Humidity 0-100 %RH ±5%RH (Standard) 0.1%RH Sensor Total Power Consumption: Multi Factor Power Consumption + Mainboard Basic Power Consumption Working Environment: -40℃-75℃ Main Board Basic Power Consumption: 200mw Protective Level: IP54 Wire Color and Wiring Sequence (RS485 Signal) Red Wire: VCC Power Supply Positive Pole Green Wire: GND Power Supply Negative Pole Black Wire: 485-A Yellow Wire: 485-B Checking Steps: 1. The preset 16 bit register is hexadecimal , is called CRC register; 2. The first 8 bit data is different from the lower part of the CRC register or put the result in the CRC register; 3. Move the contents of the register to the right one bit (towards the low), fill the highest bit with 0, and check the lowest bit; 4. If the lowest position is 0: repeat step 3 (shift again) If the lowest position is 1: the CRC register is XOR with polynomial A001 (1010 0000 0000 0001); 5. Repeat steps 3 and 4 until you move to the right 8 times, so that the entire 8 bit data has been processed; 6. Repeat Step 2 to Step 5 to process the next 8 bit data. 7. The resulting CRC register is the CRC code (the resulting CRC code is low before high after). Installation Site Requirements: 1. Good air circulation around 2. Keep away from exhaust ports, motors and other equipment 3. Stay away from areas such as standing water, fountains and sprinklers How to Use: Install and use according to the applicable voltage PackageList: 1 x Louver Box 1 x Bending Plate 1 x User Manual Notice: 1. Please check the packaging for any damage, verify the product model is consistent with the selection;2. Do not connect the wires while the power is on, power on after checking the connections are correct; 3. The wire length will affect the product output signal, do not alter the product arbitrarily during use; 4. Sensor is precise devices, users should not disassemble, use incisive objects, or erosion liquids to access the sensor during use to prevent damage to the product.

• [Versatile Industrial Applications] This comprehensive environmental sensor is ideal for agricultural monitoring greenhouse control smart buildings and industrial facilities. with its wide measurement ranges (0 200000lx outdoor light 0 5000ppm co2) and low power consumption (200mw main board) it serves as a cost effective solution for various meteorological and environmental monitoring projects.
• [Sturdy & Reliable Performance] Engineered with abs plastic this weather sensor withstands harsh environmental conditions from 40℃ to 75℃. the high reflectivity box minimizes heat absorption while the ip54 rating protects against dust and water splashes ensuring consistent performance year after year in demanding weather conditions.
• [Precision Measurement Technology] Featuring professional grade sensors this device delivers exceptional accuracy with ±0.3℃ for temperature ±5% rh for humidity ±4% for light intensity and ±(50ppm+5%) for co2 measurements. the rs485 output provides stable data transmission making it perfect for integration with weather stations or building automation systems.
• [Easy Installation & Maintenance] Designed for easy setup this sensor requires only basic mounting with included screws. the single signal cable simplifies wiring reducing installation time significantly. its minimalist design blends seamlessly into any environment whether mounted on walls poles or rooftops making it ideal for both indoor and outdoor applications.
• [All in One Weather Monitoring] This advanced weather sensor integrates multiple environmental monitoring functions into one compact device. it accurately measures atmospheric temperature humidity co2 levels and light intensity with high precision. the robust abs plastic construction ensures durability while the louver box design provides optimal airflow for accurate readings.